Estás leyendo la documentación para una versión de ROS 2 que ha llegado a su EOL (fin-de-vida), y oficialmente ya no cuenta con soporte. Si deseas información actualizada, por favor revisa Humble.
Recording and playback of topic data with rosbag using the ROS 1 bridge
This tutorial is a follow up to the Bridge communication between ROS 1 and ROS 2 demo as can be found listed with the other demos, and in the following it is assumed you have completed that tutorial already.
The ros1_bridge can either be installed from binary packages or built from source; both work for these examples.
What follows is a series of additional examples, like that ones that come at the end of the aforementioned Bridge communication between ROS 1 and ROS 2 demo.
Recording topic data with rosbag and ROS 1 Bridge
In this example, we’ll be using the cam2image demo program that comes with ROS 2 and a Python script to emulate a simple turtlebot-like robot’s sensor data so that we can bridge it to ROS 1 and use rosbag to record it.
First we’ll run a ROS 1 roscore in a new shell:
# Shell A:
. /opt/ros/kinetic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
roscore
Then we’ll run the ROS 1 <=> ROS 2 dynamic_bridge with the --bridge-all-topics option (so we can do rostopic list and see them) in another shell:
# Shell B:
. /opt/ros/kinetic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
. /opt/ros/ardent/setup.bash
# Or, if building ROS 2 from source:
# . <workspace-with-bridge>/install/setup.bash
export ROS_MASTER_URI=http://localhost:11311
ros2 run ros1_bridge dynamic_bridge --bridge-all-topics
Remember to replace <workspace-with-bridge> with the path to where you either extracted the ROS 2 binary or where you built ROS 2 from source.
Now we can start up the ROS 2 programs that will emulate our turtlebot-like robot.
First we’ll run the cam2image program with the -b option so it doesn’t require a camera to work:
# Shell C:
. /opt/ros/ardent/setup.bash
# Or, if building ROS 2 from source:
# . <workspace-with-bridge>/install/setup.bash
ros2 run image_tools cam2image -- -b
TODO: use namespaced topic names
Then we’ll run a simple Python script to emulate the odom and imu_data topics from a Kobuki base.
I would use the more accurate ~sensors/imu_data topic name for the imu data, but we don’t have namespace support just yet in ROS 2 (it’s coming!).
Place this script in a file called emulate_kobuki_node.py:
#!/usr/bin/env python3
import sys
import time
import rclpy
from nav_msgs.msg import Odometry
from sensor_msgs.msg import Imu
def main():
rclpy.init(args=sys.argv)
node = rclpy.create_node('emulate_kobuki_node')
imu_publisher = node.create_publisher(Imu, 'imu_data')
odom_publisher = node.create_publisher(Odometry, 'odom')
imu_msg = Imu()
odom_msg = Odometry()
counter = 0
while True:
counter += 1
now = time.time()
if (counter % 50) == 0:
odom_msg.header.stamp.sec = int(now)
odom_msg.header.stamp.nanosec = int(now * 1e9) % 1000000000
odom_publisher.publish(odom_msg)
if (counter % 100) == 0:
imu_msg.header.stamp.sec = int(now)
imu_msg.header.stamp.nanosec = int(now * 1e9) % 1000000000
imu_publisher.publish(imu_msg)
counter = 0
time.sleep(0.001)
if __name__ == '__main__':
sys.exit(main())
You can run this python script in a new ROS 2 shell:
# Shell D:
. /opt/ros/ardent/setup.bash
# Or, if building ROS 2 from source:
# . <workspace-with-bridge>/install/setup.bash
python3 emulate_kobuki_node.py
Now that all the data sources and the dynamic bridge are running, we can look at the available topics in a new ROS 1 shell:
# Shell E:
. /opt/ros/kinetic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
rostopic list
You should see something like this:
% rostopic list
/image
/imu_data
/odom
/rosout
/rosout_agg
We can now record this data with rosbag record in the same shell:
# Shell E:
rosbag record /image /imu_data /odom
After a few seconds you can Ctrl-c the rosbag command and do an ls -lh to see how big the file is, you might see something like this:
% ls -lh
total 0
-rw-rw-r-- 1 william william 12M Feb 23 16:59 2017-02-23-16-59-47.bag
Though the file name will be different for your bag (since it is derived from the date and time).
Playing back topic data with rosbag and ROS 1 Bridge
Now that we have a bag file you can use any of the ROS 1 tools to introspect the bag file, like rosbag info <bag file>, rostopic list -b <bag file>, or rqt_bag <bag file>.
However, we can also playback bag data into ROS 2 using rosbag play and the ROS 1 <=> ROS 2 dynamic_bridge.
First close out all the shells you opened for the previous tutorial, stopping any running programs.
Then in a new shell start the roscore:
# Shell P:
. /opt/ros/kinetic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
roscore
Then run the dynamic_bridge in another shell:
# Shell Q:
. /opt/ros/kinetic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
. /opt/ros/ardent/setup.bash
# Or, if building ROS 2 from source:
# . <workspace-with-bridge>/install/setup.bash
export ROS_MASTER_URI=http://localhost:11311
ros2 run ros1_bridge dynamic_bridge --bridge-all-topics
Then play the bag data back with rosbag play in another new shell, using the --loop option so that we don’t have to keep restarting it for short bags:
# Shell R:
. /opt/ros/kinetic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
rosbag play --loop path/to/bag_file
Make sure to replace path/to/bag_file with the path to the bag file you want to playback.
Now that the data is being played back and the bridge is running we can see the data coming across in ROS 2.
# Shell S:
. /opt/ros/ardent/setup.bash
# Or, if building ROS 2 from source:
# . <workspace-with-bridge>/install/setup.bash
ros2 topic list
ros2 topic echo /odom
You should see something like:
% ros2 topic list
/clock
/image
/imu_data
/odom
/parameter_events
You can also see the image being played from the bag by using the showimage tool:
ros2 run image_tools showimage