Estás leyendo la documentación para una versión de ROS2 anterior, pero que aún cuenta con soporte. Para información respecto a la última versión, por favor revisa Humble.

Ubuntu (binary)

This page explains how to install ROS 2 on Ubuntu Linux from a pre-built binary package.

Nota

The pre-built binary does not include all ROS 2 packages. All packages in the ROS base variant are included, and only a subset of packages in the ROS desktop variant are included. The exact list of packages are described by the repositories listed in this ros2.repos file.

There are also Debian packages available.

System Requirements

We support Ubuntu Linux Focal Fossa (20.04) 64-bit x86 and 64-bit ARM.

Add the ROS 2 apt repository

You will need to add the ROS 2 apt repository to your system.

First ensure that the Ubuntu Universe repository is enabled.

sudo apt install software-properties-common
sudo add-apt-repository universe

Now add the ROS 2 GPG key with apt.

sudo apt update && sudo apt install curl
sudo curl -sSL https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -o /usr/share/keyrings/ros-archive-keyring.gpg

Then add the repository to your sources list.

echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/ros-archive-keyring.gpg] http://packages.ros.org/ros2/ubuntu $(. /etc/os-release && echo $UBUNTU_CODENAME) main" | sudo tee /etc/apt/sources.list.d/ros2.list > /dev/null

Downloading ROS 2

  • Go the releases page

  • Download the latest package for Ubuntu; let’s assume that it ends up at ~/Downloads/ros2-package-linux-x86_64.tar.bz2.

    • Note: there may be more than one binary download option which might cause the file name to differ.

  • Unpack it:

    mkdir -p ~/ros2_foxy
    cd ~/ros2_foxy
    tar xf ~/Downloads/ros2-package-linux-x86_64.tar.bz2
    

Installing and initializing rosdep

sudo apt update
sudo apt install -y python3-rosdep
sudo rosdep init
rosdep update

Installing the missing dependencies

ROS 2 packages are built on frequently updated Ubuntu systems. It is always recommended that you ensure your system is up to date before installing new packages.

sudo apt upgrade

Set your rosdistro according to the release you downloaded.

rosdep install --from-paths ~/ros2_foxy/ros2-linux/share --ignore-src -y --skip-keys "cyclonedds fastcdr fastrtps rti-connext-dds-5.3.1 urdfdom_headers"

Note: If you’re using a distribution that is based on Ubuntu (like Linux Mint) but does not identify itself as such, you’ll get an error message like Unsupported OS [mint]. In this case append --os=ubuntu:focal to the above command.

Optional:
If you want to use the ROS 1<->2 bridge, then you must also install ROS 1.
Follow the normal install instructions: http://wiki.ros.org/noetic/Installation/Ubuntu

Installing the python3 libraries

sudo apt install -y libpython3-dev python3-pip
pip3 install -U argcomplete

Install development tools (optional)

If you are going to build ROS packages or otherwise do development, you can also install the development tools:

sudo apt install ros-dev-tools

Install additional DDS implementations (optional)

If you would like to use another DDS or RTPS vendor besides the default, you can find instructions here.

Environment setup

Source the setup script

Set up your environment by sourcing the following file.

 # Replace ".bash" with your shell if you're not using bash
 # Possible values are: setup.bash, setup.sh, setup.zsh
. ~/ros2_foxy/ros2-linux/setup.bash

Try some examples

In one terminal, source the setup file and then run a C++ talker:

. ~/ros2_foxy/ros2-linux/setup.bash
ros2 run demo_nodes_cpp talker

In another terminal source the setup file and then run a Python listener:

. ~/ros2_foxy/ros2-linux/setup.bash
ros2 run demo_nodes_py listener

You should see the talker saying that it’s Publishing messages and the listener saying I heard those messages. This verifies both the C++ and Python APIs are working properly. Hooray!

Next steps after installing

Continue with the tutorials and demos to configure your environment, create your own workspace and packages, and learn ROS 2 core concepts.

Using the ROS 1 bridge

The ROS 1 bridge can connect topics from ROS 1 to ROS 2 and vice-versa. See the dedicated documentation on how to build and use the ROS 1 bridge.

Additional RMW implementations (optional)

The default middleware that ROS 2 uses is Fast-RTPS, but the middleware (RMW) can be replaced at runtime. See the guide on how to work with multiple RMWs.

Troubleshooting

Troubleshooting techniques can be found here.

Uninstall

  1. If you installed your workspace with colcon as instructed above, «uninstalling» could be just a matter of opening a new terminal and not sourcing the workspace’s setup file. This way, your environment will behave as though there is no Foxy install on your system.

  2. If you’re also trying to free up space, you can delete the entire workspace directory with:

    rm -rf ~/ros2_foxy